Filter
Top Products
ENGLISH
32
sure the switch is in the OFF position.
An accidental start-up can cause injury.
Pop-off Brushes
The motor will be automatically shut off when the
carbon brushes are nearly worn out and the tool
needs servicing. The carbon brushes are not user-
serviceable. Take the tool to an authorised D
EWALT
repair agent.
Lubrication
IN HORIZONTAL APPLICATIONS
• Adjust the fluid flow as required using the flow
regulator (m) (fig. 1).
• Add more cutting fluid if the shavings become
blue.
VERTICAL AND OVERHEAD APPLICATIONS
Dip the cutter in cutting paste or apply an
appropriate spray.
LUBRICATING THE FEED TRAVEL (FIG. 9)
The feed travel should be lubricated periodically with
grease to ensure smooth operation.
• Raise the motor unit to the highest position
possible.
• Lubricate the dove-tail guide way (dd) at both
sides.
• Lubricate the gear rack (ee).
After repeated use, the gear rack may become
loose. If necessary, adjust the 5 self-locking set
screws at the left side. Tighten screws in series until
the gear rack moves freely in the dove-tail guide but
does not allow the motor to wobble.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
EWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only DEWALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your DEWALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and
recycling of DEWALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
DEWALT office at the address indicated in this
manual. Alternatively, a list of authorised DEWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.