Filter
Top Products
7
other construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling, and other construction activities. Wear protective clothing and wash
exposed areas with soap and water. Allowing dust to get into your mouth, eyes,
or lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust, which may cause
serious and permanent respiratory or other injury. Always use AS/NZS1716 approved
respiratory protection appropriate for the dust exposure. Direct particles away from
face and body.
WARNING: Always wear proper personal hearing protection that conforms to
AS/NZS1270 during use. Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ......................volts A .........................amperes
Hz ....................hertz W ........................watts
min ..................minutes or AC ............alternating current
or DC .....direct current or AC/DC ......alternating or
...................Class I Construction direct current
(grounded) no .......................no load speed
...................Class II Construction n .........................rated speed
(double insulated) .......................earthing terminal
…/min .............per minute .......................safety alert symbol
BPM .................beats per minute IPM .....................impacts per minute
RPM .................revolutions per minute SPM ....................strokes per minute
sfpm ................surface feet per minute
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
COMPONENTS (FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Trigger switch
B. Lock-off button
C. Lock-on button
D. Spindle lock button
E. Spindle (Fig. 9)
F. Guard
G. Side handle
H. LED indicator
I. Anti-vibration ring
J. Dust ejection port
FIG. 1
I
F
H
J
A
B
C
D
G