Filter
Top Products
13D-Link DNS-343 User Manual
Section 3 - Configuration
Configuration
When first powered on, during the initial boot sequence, the DNS-343 will wait to be assigned an IP address via DHCP. If it does
not receive a DHCP assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32. It is recommended
to use the included D-Link Easy Search Utility when accessing and configuring the DNS-343 for the first time. If you want to
change the IP address before logging in or are unable to connect to the DNS-343 IP address, you can use the Easy Search
Utility provided on the product CD to locate the device on your network and make any needed changes.
The Easy Search Utility displays all
available DNS-343 devices within
the same network.
Refresh
Volumes that are available for
mapping are displayed here.
Click Configuration to access the
Web based configuration of the
DNS-343.
Click Apply to save changes to the
LAN Settings.
Configure the LAN Settings for the
DNS-343.
Network
Storage Device
Refreshes the device list.
Configuration
LAN
Apply
Drive Mapping
Available
Drive Letters
Choose an available drive letter.
Click Connect to map the selected
volume. Click Disconnect to
disconnect the selected mapped
volume.
Exit
Click Exit to close the utility.
Easy Search Utility