Filter
Top Products
23D-Link DNS-343 User Manual
Section 3 - Configuration
LAN
In this section, you can configure the LAN settings for your DNS-343.
Link Speed
DHCP Client
Static IP
The LAN Link Speed is set to Auto by
default, but can be manually set to 100Mbps
or 1000Mbps.
Select DHCP Client to obtain an IP address
from your DHCP server.
Select Static IP to assign the IP information
for the DNS-343 manually.
The DNS-343 can support Jumbo Frames
that are between 3000 and 9000 bytes in
size. In order to enable Jumbo Frames on
the DNS-343, click the Enable radio button
and select an MTU size from the MTU
combo box.
Jumbo Frames
Click on the Save Settings button to apply and save the new settings. If you have changed the IP address or selected
DHCP client, it will be necessary to log in again using the new IP address. If you do not know the new address (as
would likely be the case when changing from a static IP address to DHCP client), use the Easy Search Utility on the
Installation CD to obtain the IP address of your device.