Filter
Top Products
SPECIFICATION
- 2 -
Part No. .............................
CDH120V ................................................................ CDH140V
Stock No. ...................... 63121 ............................................................................. 63122
Battery pack ...................... 1 x 12V D.C ....................................................... 1 x 14.4V D.C
Speed................................ 0-400/0-1250rpm ........................................ 0-400/0-1250rpm
Impact blows per min........ 16,000 max. .......................................................... 16,000 max.
Chuck capacity ................. 10mm ............................................................................ 10mm
Spindle thread...................
3
⁄8” x 24UNF ...........................................................
3
⁄8” x 24UNF
Drilling capacities:
Wood .............................. 16mm ............................................................................ 20mm
Mild steel ....................... 10mm ............................................................................ 10mm
Masonry ......................... 10mm ............................................................................ 10mm
Max. torque ....................... 125kgf-cm .............................................................. 130kgf-cm
Charging time................... 1 hr approx .......................................................... 1 hr approx.
Charger input voltage ....... 240V/50Hz.............................................................. 240V/50Hz
Weight - machine only ...... 1.9kg. ............................................................................ 2.0kg.
Sound power level............. 79.2dB(A) ................................................................ 79.2dB(A)
Sound pressure level......... 92.2dB(A) ................................................................ 92.2dB(A)
Vibration level................... 1.38m/s
2
..................................................................... 1.38m/s
2
Whilst every effort has been made to ensure accuracy of information given in this
manual is correct at the time of going to print, the Draper Tools policy of continuous
improvement determines the right to change specification without notice.
GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to
be free from defective materials and workmanship for a period of 12 months from the date of
purchase.
Should the machine develop any fault, please return the complete tool to your distributor or
contact Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF England.
Telephone (023) 8026 6355.
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship repairs will be carried out free of charge. This guarantee does not apply to
normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe
handling, alterations, accident, or repairs attempted or made by any personnel other than the
authorized Draper warranty repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of
its terms are not authorised.
Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify
your proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not affect your statutory
rights.
Draper Tools Limited.
Note: This tool is intended for domestic use only.