Filter
Top Products
5
• When starting to drill, run the engine at full
throttle.
WARNING DANGER
BEFORE DRILLING, BE SURE TO READ
AND UNDERSTAND THE ENTIRE
OPERATOR’S MANUAL TO AVOID THE
CHANCE OF SERIOUS INJURY.
• Do not force the drills and only move as
quickly as the drills will allow.
• Stop the engine and disconnect from
ignition cable before: - cleaning or when
clearing a blockage; checking,
maintenance or working on the machine.
• Handle fuel with care; it is highly
flammable. Never add fuel to a machine
with a running or hot engine.
• Do not attempt to repair the machine
unless you are qualified to do so.
• Do not operate the machine with a
damaged or excessively worn cutting
device.
• Always ensure all handles and guards are
fitted when using the machine. Never
attempt to use an incomplete machine or
one fitted with an unauthorised
modification.
• When transporting or storing the machine
always remove the drill.
• To reduce fire hazard keep engine and
silencer free of debris, leaves or excessive
grease.
• Handle drill with care, contacting with drills
may cause injury.
OPERATING TECHNIQUES