Filter
Top Products
Design LED 60 Strip WA™
©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com
CAUTION!
Be sure a qualified electrician performs all electrical
connections before attempting any operation.
Clamp Mounting
The Design LED 60 Strip WA™ provides a unique mounting bracket assembly that allows
the unit to stand on flat surface, hang on truss via a clamp, or be used in cluster allow
multiple units to rigged together (see the illustration below). Regardless of the mounting
option you choose please refer to the safety guidelines in this manual to avoid damage to
the unit and/or injury to persons.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an
added safety measure be sure to attach at least one properly rated safety cable to the
fixture. See illustration below.
Securing the Design LED 60 Strip WA™
Always secure your fixture with a safety cable when suspend-
ing the unit from truss or other means. The fixture provides a
built-in rigging point for a safety cable as illustrated above. Be
sure to only use the designated rigging point for a safety cable.
Never secure a safety cable to the hanging bracket.