Filter
Top Products
Design LED 60 Strip WA™
©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com
This unit will keep and retain the last DMX command in the event of DMX signal failure. To
reset the fixture you must turn the power off.
DMX LED Indicator:
The fixture has an LED indicator located by the dipswitches. This indicator has two
functions as detailed below;
1) LED flashing green = No incoming DMX signal, fixture will function in stand-alone mode.
Use the dipswitches to adjust the manual settings.
2) LED Solid Green = Fixture is receiving a DMX signal and will function in DMX mode. Use
the dipswitches to set the DMX address.