ETA Systems ETA-S20RT Impact Driver User Manual


  Open as PDF
of 12
 
– 10 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
ETA-S20RT
AC Distribution & Suppressor Unit
SPECIFICATIONS
Type PowerConditioner&Suppressor
Load Rating 20A
Safety Listings ETL (UL 60065 Standard)
Front Panel
Outlets 1 Unswitched
USBPort 1USBCharge/LightPort(5VDC,1A)
Activation Switch Rocker
CircuitBreaker 20AResettable
Indicators AC Power On, AC Fault, EVS Protect
Rear Panel
AC Outlets 8 Outlets Total
LEDLightSocket XLRSockettoProvide12VDCforOptionalAP-GNL18GooseneckLamp
LED Light Switch Two position (On / Off)
Remote Activation Latching Type Dry Contact Closure or 5V-24VDC
Remote Activation Connector 4 Position 3.5mm Phoenix Type Connection
ACMainsPowerCord 9'(2.74m),12Gauge,20AMaleACPlug
Technical Data
Current Rating 20 Amps
Operating Voltage 102VAC - 132VAC
Power Consumption 8 Watts
Min.SpikeClampingVoltage 460VRMS@3,000A
Max. Spike Clamping Voltage 6000V
Max.SpikeClampingResp.Time 1Nanosecond
SpikeClampingVoltage@100A 1250Vpfor20µs
Maximum Surge Current 6,500A
EnergyRating@2ms 600Joules
NoiseAttenuationRFI 10dB@10kHz/40dB@100kHz/100dB@10MHz
EVS Limits 95VAC Low, 140VAC High, Auto Reset
Temperature Range 5° – 35°C
Humidity Range 5% to 95% Relative Humidity
Mechanical
ChassisFinish Black
Mounting Rack Mount, 1 RU
Height 1.75" (1RU, 44.5mm)
Width 19" (482.6mm)
Depth 8" (203mm)
Weight 5.5 lbs (2.49kg)
 previous next