Filter
Top Products
11
en
Assembly instructions.
Mounting the suction device (Figure 2).
Before mounting or replacing application tools or accessories, pull the power
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
➤Mount the suction device step by step as shown in the figures.
➤For connection with a FEIN Dustex or a vacuum cleaner, various hose adapters are
available as an accessory.
➤To remove the suction device again, push the clamp at the mark to the rear (➑).
WARNING
Suction device
➊
➋
➌
➍➎➏
➑
➐
Fig. 2
3 41 01 091 21 0.book Seite 11 Montag, 29. Juni 2009 8:32 08