Filter
Top Products
3
Health hazard by dust
Various dust created by
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known (to the State of Califor-
nia) to cause cancer, birth defects or oth-
er reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products,
• Arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies, de-
pending on how often you do this type of
work.
To reduce your exposure to these
chemicals work in a well venti-
lated area and use approved
safety equipment, such as dust
masks that are specially designed to fi lter out
microscopic particles.
TO REDUCE THE RISK OF
INJURY, USER MUST READ AND UN-
DERSTAND INSTRUCTION MANUAL.
Table of Contents
Technical data 3
Symbols 4
Design 4
Intended use 4
MFT/3: Setting up and assembly 5
Step 1: Setting up 5
Step 2: Trim splinter guard 5
Step 3: Setting up the guide rail support 6
Step 4: Attaching the guide rail 7
Step 5:
Attaching the pre-set profi le setting
rail 7
Step 6: Calibrating angle 8
Step 7: Adjusting the pre-set profi le set-
ting rail 8
Step 8: Adjusting the guide rail in rela-
tion to the workpiece 9
Step 9: Adjusting the cutting depth for
sawing [Fig. 11] 9
MFT/KAPEX: Mounting the KAPEX 10
Maintenance 10
Turning the perforated top 10
Accessories, tools 10
Warranty 11
The multifunction table offers a wide range of application options! To fi nd out more L
about possible machine applications, order the MFT application manual on the inter-
net.
Technical data
MFT/3
Bench dimensions
(width x length)
1157 x 773 mm
Bench height
- with foldaway legs 900 mm
- without foldaway legs
180 mm
max. working width 700 mm
max. workpiece thick-
ness
78 mm
Weight 28 kg
MFT/KAPEX
Bench dimensions
(width x length)
869 x 581 mm
Bench height
- with foldaway legs 790 mm
- without foldaway legs 180 mm
Weight 18 kg