Filter
Top Products
11
More pressure on the trigger results in faster blade speed. Less pressure on the trigger results
in slower blade speed.
b) Preset Speed Adjusting Dial
This feature allows you to preset the
maximum speed by rotating the dial on
the top handle of the saw to a higher or
lower setting. The tool will never operate
at a speed higher than the maximum
speed setting selected on the speed dial.
– See Fig 5
c) Electronic Cruise Control
This tool is equipped with an electronic
module with tachometric feedback which
guarantees constant blade speed under
load. This feature allows the saw to cut at a
consistent rate of speed and maintain a
consistent finish quality even if the load on
the tool increases or decreases.
d) Lock-On Button
This button is located on the side of the saw’s handle above the trigger and allows you to
continuously operate the saw, at the speed set with the preset Speed Dial, without holding the
trigger. To lock the trigger “ON”, squeeze the trigger, depress the button, and then release the
trigger – Fig. 6. To unlock the trigger, squeeze the trigger and release it without depressing the
lock-on button – Fig. 7
English
Fig. 3
Fig. 4
Fig. 5