Filter
Top Products
170
ROUTER BITS & SETS
Joinery Bits
Raised Panel “V” Joint Bit
• Mating surfaces are at an angle, not vertical, so the dark lines like those created by
standard finger joint bits arenot visible.
• Bit does not have to be centered in the wood.
• Simply raise or lower the bit 3/32" to route the mating edge.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Application: Producing strong, attractive glue joint raised panels
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Item Overall Carbide Minor Angle Shank Overall
Number Dia.(D) Height(h) Height (d) Dia.(A) Length(H)
99-038 1-3/8" 1-37/64" 3/16" 80° 1/2" 3-1/16"
D
5/32"
3/16"
d
h
H
A
®
# 99-038
Opposing Grain Direction
Example of “V” Jointed Panel