Filter
Top Products
Rabbeting Bits with Bearing Set
• With interchangeable bearings to cut rabbets of different depths, these sets produce
super smooth cuts on both surfaces of the rabbet.
• 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
• Wrench included.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Joining boards and letting in back panels with
different depths of cut
159
ROUTER BITS & SETS Joinery Bits
Red Item Numbers Indicate 1/2" Shank All Profile Drawings 1:1 Scale
Item Overall Rabbeting Carbide Shank Overall
Number Dia.(D) Depths Height(h) Dia.(A) Lenght(H)
32-502 1-3/8" 5/16",3/8",7/16",1/2" 1/2" 1/4" 2-1/4"
32-504 1-3/8" flush, 1/8",1/4",5/16",3/8",7/16",1/2" 1/2" 1/4" 2-1/4"
32-522 1-3/8" 5/16", 3/8", 7/16", 1/2" 1/2" 1/2" 2-1/4"
32-524 1-3/8" flush, 1/8",1/4",5/16",3/8",7/16",1/2" 1/2" 1/2" 2-1/4"
32-526 1-3/8" flush, 1/8",1/4",5/16",3/8",7/16",1/2" 3/4" 1/2" 2-1/2"
D
A
h
H
1/8"
1/2" Max.
# 32-504
# 32-524
1/8"
3/4" Max.
# 32-526
1/4"
1/2" Max.
# 32-504
# 32-524
1/4"
3/4" Max.
# 32-526
5/16"
1/2" Max.
# 32-502
# 32-504
# 32-522
# 32-524
5/16"
3/4" Max.
# 32-526
3/8"
1/2" Max.
# 32-502
# 32-504
# 32-522
# 32-524
3/8"
3/4" Max.
# 32-526
7/16"
3/4" Max.
# 32-526
1/2"
3/4" Max.
# 32-526
7/16"
1/2" Max.
# 32-502
# 32-504
# 32-522
# 32-524
1/2"
1/2" Max.
# 32-502
# 32-504
# 32-522
# 32-524
Supplied 3/8" STEP
WASHER to use when
mounting 3/8" ball
bearing only.
• Wrench
#62-402
• 3/8" STEP WASHER
#62-311
• 1/2" STEP WASHER
#62-313
Both Sets Include the Wrench and Step Washers
Set of
4
Set of
7
or
3/8"
1-1/8" Bearing #62-148
7/8" Bearing #62-146
3/4" Bearing #62-144
5/8" Bearing #62-113
1/2" Bearing #62-104
3/8" Bearing #62-102
1-3/8" Bearing #62-150
156-173 Pages 5-24-06 8/30/06 4:17 PM Page 159