Filter
Top Products
162
ROUTER BITS & SETS
Joinery Bits
Three Wing Slotting Cutters
• Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and
60-102 for 1/2" shanks.
• Compatible with 62-108 bearing.
• Cutter 56-109 can be used for biscuit joining.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Producing slots and grooves for T-moldings, spline
joints, tongue & groove joints and many other applications
Red Item Numbers Indicate 1/2" ShankAll Profile Drawings 1:1 Scale
Item Overall Number Bore Carbide
Number Dia.(D) of Cutters Dia.(n) Height(h)
56-100 2" 3 5/16" 1/16"
56-106 2" 3 5/16" 3/32"
56-108 2" 3 5/16" 1/8"
56-109 2" 3 5/16" 5/32"
56-110 2" 3 5/16" 3/16"
56-112 2" 3 5/16" 1/4"
®
D
h
n
1/16"
9/16" Max.
# 56-100
3/32"
9/16" Max.
# 56-106
1/8"
9/16" Max.
# 56-108
5/32"
9/16" Max.
# 56-109
3/16"
9/16" Max.
# 56-110
1/4"
9/16" Max.
# 56-112
Four Wing Slotting Cutters
• Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and
60-102 for 1/2" shanks.
• Compatible with 62-108 bearing.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Producing slots and grooves for T-moldings, spline
joints, tongue & groove joints and many other applications
Item Overall Number Bore Carbide
Number Dia.(D) of Cutters Dia.(n) Height(h)
58-100 2" 4 5/16" 1/16"
58-106 2" 4 5/16" 3/32"
58-108 2" 4 5/16" 1/8"
58-110 2" 4 5/16" 3/16"
58-112 2" 4 5/16" 1/4"
®
D
h
n
1/16"
9/16" Max.
# 58-100
3/32"
9/16" Max.
# 58-106
3/16"
9/16" Max.
# 58-110
1/4"
9/16" Max.
# 58-112
1/8"
9/16" Max.
# 58-108
156-173 Pages 5-24-06 8/30/06 4:18 PM Page 162