Filter
Top Products
15
ProLINE-RoadRunner Operator’s Guide A
3. Still holding it at an angle, slide
it forward as far as it will go.
(The nose will fit under the lip on
the MFU.)
4. Lower RoadRunner and jiggle it
to ensure that the angle bracket
has settled into the spring
clamp on the MFU.
NOTE: The assembly machine
pick point will correspond with the
MFU slot number that is inline with
the conveyor belt.
Make sure the communication
socket number corresponds with
that slot number.
4
Warning
Heavy. 15 kg. Do not drop. Turn off
RoadRunner and disconnect facilities
before removing it from a feeder bank.