Filter
Top Products
17
ProLINE-RoadRunner Operator’s Guide A
3. Connect to a grounded power
source using a cable with a
standard IEC 320 plug.
RoadRunner accepts power
between 100 and 240 VAC,
50/60Hz.
4. Align and push the
communications cable end into
the RoadRunner connector. (The
other end should already be
connected to the MFU.)
NOTE: To disconnect the air hose,
grasp the collar on the connector
and pull back.
The air line is equipped with a
“quick connect” that will stop
airflow when disconnected.
Pull Collar
3
4