Filter
Top Products
Operations
6-12 C141-E050-02EN
6.4.1 Spare area
Following two types of spare area are provided for every physical head.
1) Spare cylinder for sector slip:
used for alternating defective sectors at formatting in shipment (4 cylinders)
2) Spare cylinder for alternative assignment:
used for automatic alternative assignment at read error occurrence.
(2 cylinders)
6.4.2 Alternating defective sectors
The two alternating methods described below are available:
(1) Sector slip processing
A defective sector is not used and is skipped and a logical sector address is
assigned to the subsequent normal sector (physically adjacent sector to the
defective sector).
When defective sector is present, the sector slip processing is performed in the
formatting.
Figure 6.7 shows an example where (physical) sector 5 is defective on head 0 in
cylinder 0.
If an access request to physical sector 5 is specified, the device accesses physical sector 6 instead of sector 5.
86 754321
(unused)
228 229 230
2292282277654321
Note: If an access request to physical sector 5 is specified, the device
accesses physical sector 6 instead of sector 5.
Figure 6.7 Sector slip processing