Fujitsu PG-189x Power Screwdriver User Manual


 
70
3 Click the [Link] tab.
4 Set the transmission speed and duplex mode to use in [Speed and
Duplex Settings].
5 Click [OK].
6 Restart the system.
` To fix full-duplex mode, make sure to set both the LAN card and the connecting devices.
For 1000 BASE-T LAN card (PG-1852/1862/1891(L)/1892(L)/286/
2861(L))
When a 1000Mbps speed cannot be fixed and the connecting devices can transmit at 1000Mbps,
normally transmission is performed at 1000Mbps in default setting (auto negotiation is enabled).
When fixed transmission speed and duplex mode settings are necessary, perform the following. This
setting can only specify a speed under 100Mbps.
1 Log on with the administrator privileges.
2 Double click the LAN adapter to be used by Device Manager and
start Intel
®
PROSet.
J" How to Start Intel® PROSet"(pg.53)
3 Click the [Link] tab.
4 Set the transmission speed and duplex mode to use in [Speed and
Duplex Settings].
5 Click [OK].
6 Restart the system.
` To fix full-duplex mode, make sure to set both the LAN card and the connecting devices.