Fujitsu PG-189x Power Screwdriver User Manual


 
Appendix A 73
E
` When replacing a LAN card that configures a team, if the replaced LAN card is set as
primary, the MAC address of the replaced LAN card will be taken over to the newly
installed LAN card and it will be used after replacement. Therefore, when the
replaced LAN card is used in the same segment again, conflict of the MAC address
occurs. When replacing a LAN card used in a team, it is necessary to set the driver
again according to "A.5 Replacement Procedure for Cards that Configure Teams"
(
Jpg.72).
` When installing the newly installed LAN card in a different slot, it is necessary to
remove the driver and reinstall it.