Filter
Top Products
For answers to your Monogram,
®
GE Profile
Performance Series,
™
GE Profile,
™
GE,
Hotpoint and RCA appliance questions, call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
Monogram.
™
Created 1/98
ZV370YSS—30" Professional Vent Hood
Dimensions and Specifications (in inches)
Soffit Installation:
• Drill 3/16" pilot holes through the shims and into the
soffit studs.
• Hold the hood against the soffit and secure with six lag
screws with washers.
• For additional support and to minimize vibration during
operation, we recommend that the hood be secured to
the back wall.
• Drive lag screws through the rear panel of the hood
and into the wall studs.
Wall Mount Installation:
• Drill 3/16" pilot holes, approximately 1-1/2" deep, in
all mounting screw locations.
• Hold the hood in position and drive lag screws in top
left and right mounting holes.
Note: 5/16" hanger bolts can be used in the two top
locations. Place the hood onto the hanger bolts and
secure with nuts and washers.
• Install lag screws with washers in remaining
mounting holes.
Installation Information:
Before installing, consult installation instructions
(Pub. No. 49-8816) packed with product for current
dimensional data.
SOFFIT INSTALLATION
WALL MOUNT INSTALLATION
Ceiling
5-1/2"
5-1/2"
11-7/16"
12"
Junction
Box
30" Hood Top View - Front Side
7"
29-7/8"
Back Side
11-7/16"
4-1/4"
3/4"
3"
3"
2-7/8"
3-1/8"
2-1/2"
12-7/16" 12-7/16"
8-15/16”
8-15/16”
C
L
6" or 12"
Duct
Cover
Ceiling Drywall
30" Hood Rear View
18"
Mounting
Screw
Holes
6-1/2"
2-1/2"
6-1/2"
6”
6”
29-7/8”