Genesis Advanced Technologies GMSUDR15L Cordless Saw User Manual


  Open as PDF
of 17
 
FIG 14
FIG 13
b
a
24
English
10" Slide Compound Laser Miter Saw
Operator’s Manual GMSUDR15L
11


OPERATION
WARNING: Always be sure the miter saw is disconnected from the power source before making any
adjustments or setting up prior to cutting. Failure to disconnect or unplug the machine may cause accidental starting,
resulting in serious personal injury.
TRANSPORTING THE SAW




WARNING: Always transport the miter saw in the locked down position, carrying the saw by carrying handle
on the cutting arm. DO NOT lift or carry the miter saw using the switch handle, doing so may cause misalignment of
miter and bevel settings.
LOCKING AND UNLOCKING THE CUTTING HEAD

To lock down the cutting head



To unlock the cutting head,




WARNING: Always transport the miter saw in the locked down position, carrying the saw by carrying handle on
the cutting arm. DO NOT lift or carry the miter saw using the switch handle, doing so may cause misalignment of miter
and bevel settings.
STARTING AND STOPPING THE MITER SAW
To start the miter saw
To stop the miter saw


WARNING: After completing a cut, release the switch trigger to activate the electric blade brake. Keep the
cutting head down until the blade comes to a complete stop before raising the cutting head to the upward or starting
position. A rotating saw blade can be dangerous.
WARNING: The torque resulting from electric blade brake activation may loosen the arbor bolt. Occasionally
check the arbor bolt and tighten if necessary.
TABLE HAZARD AREA




WARNING: Keep your hands outside the “Hazard Zone” and out of the path of the saw blade. Use the supplied
work clamp or other clamping means to secure the work piece in place before making a cut with the miter saw.
WARNING:Always be sure the miter saw is disconnected from the power source before making any
adjustments or during set-up prior to cutting. Failure to disconnect or unplug the machine may cause accidental
starting, resulting in serious personal injury.
 previous next