FIG 5
a
FIG 6
FIG 7
b
c
d
e
f
English
10" Slide Compound Laser Miter Saw
Operator’s Manual GMSUDR15L
ADJUSTING SUPPORT FOOT
DEPTH OF CUT ADJUSTMENT
WARNING: Be sure the machine is unplugged from the power source. Accidental saw start-up could result in
serious personal injury.
NOTE: Your Miter Saw should come adjusted properly for depth of cut while using the Factory-installed blade for
normal operation.
.
To adjust the miter saw blade’s cutting depth
NOTE: This is factory set and usually does not require adjusting. (This saw may not come with the necessary tools for
the following procedure.)
Auxiliary Depth Control Assembly
NOTE: This is useful for performing dado cuts or to create lap joints.
ALIGNMENT
SQUARING THE SAW BLADE TO THE FENCE
WARNING: Be sure that the tool is switched off and unplugged from the power source before performing any
work on the tool. Failure to unplug the saw may result in accidental start-up, causing possible serious personal injury.