English
10" Slide Compound Laser Miter Saw
Operator’s Manual GMSUDR15L
Make sure all the saw’s adjustment handles are tight
Never apply lubricants
Never use saw blades
Never start the tool
Allow the motor
Always keep the blade guards
Never reach around
Never lock the switch
Never attempt to recut small pieces.
Never cut ferrous metals or masonry.
Do not perform free-hand cutting operations
Long or wide work pieces should be properly supported.
IMPORTANT:After completing the cut
Turn off the saw and allow the blade
Turn off the saw and allow the blade
Never perform layout,
Turn the machine “off” and disconnect the machine
Disconnect the machine
If any part of your miter saw is missing, damaged,
WARNING:
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS
EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS