Filter
Top Products
4
Specifications
Voltage: 230 –240V ~ 50Hz
Input power: 360W
Hammer rate: 0 –4200 min
-1
Nail length: 40mm (1-5/8") to 150mm (6")
Nail type: Accepts all commonly
available nail types including
oval brad nails, round shank
nails and serrated nails
Nail head size: Maximum of 10mm
Depth of nail (The value
given is approximate only
as the depth will depend
on the hardness of the
wood into which the nail
is driven):
Position 1: Nail head underflush by 1mm
Position 2: Nail head level with surface
Position 3: Nail head 5mm proud
from surface
Position 4: Nail head 10mm proud
from surface
Sound pressure value: 91.9dB(A)
Net weight: 2.7kg
General safety rules
WARNING. Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
Save these instructions
1. Work area
a. Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite
the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.