Filter
Top Products
9
Operation
WARNING. Make sure your
finger is not on the trigger
switch (1) when loading
nails into the tool (Fig. E).
Safety switch
1. The nailer is protected
against accidental
operation by the safety switch
(6). When this switch is in its
mid position the trigger switch
(1) is inoperable (Fig. F).
DANGER. Always set the
safety switch (6) to the mid
position when not actually
using the nailer.
Ensure that the safety switch (6) is pressed in.
You can press this switch from either side.
Loading a nail
1. Hold the nailer in the operating
position and use your thumb
to press the jaw release button
(4) (Fig. G).
2. Insert the nail, head first,
between the jaws (3) as far
as it will go and then release
the jaws by taking your thumb
off the jaw release button (4)
(Fig. H).
Note. The nailer accepts nails
from 40mm (1 5/8”) to 150mm
(6”) long. The shank can be oval,
round or serrated. The head
must not be more than 10mm
(3/8”) in diameter.
You are now ready to use the nailer
.
Note.
This product is designed for intermittent use. The
recommended operational duration is 10 seconds on and
10 seconds off. Please operate accordingly.
Driving a nail
1. Once the nail is inserted in
the jaws and button (4) is
released, the nail can be
driven into the workpiece.
2. Hold the tool such that the nail
is guided into the workpiece
by the automatic hammering
process (Fig. I).
3. Squeeze the trigger switch
(1) (Fig. J).
4. When the nail has been driven
to the required depth, release
trigger switch (1) and either
return the safety switch (6)
to its mid position or use the
release button (4) to open the
jaws and insert another nail.
Note. It is best to trial the depth adjustment setting using
the same type of nail on a scrap piece of wood of the same
type as the workpiece. It may be necessary to change the
depth setting to suit the circumstances.
Note. The nail can be driven between the perpendicular
and 45°.
WARNING. To avoid personal injury, keep your fingers away
from the trigger switch (1) until you are ready to drive a nail.
Do not point the nailer at anyone when a nail is loaded into
the nailer.
G
H
I
J
F
E