Filter
Top Products
6
WARNING. Before connecting a tool to a power source
(power
point receptacle, outlet, etc.) be sure that the voltage supply is
the same as that specified on the nameplate of the tool. A power
source with a voltage greater than that specified for the tool can
result in serious injury to the user, as well as damage to the tool.
If in doubt, do not plug in the tool. Using a power source with a
voltage less than the nameplate rating is harmful to the motor.
The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury resulting
from such cases of misuse.
The manufacturer shall not be liable for any changes made to
the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may
arise in connection with the tool’s construction and design:
• Damage to hearing if effective earmuffs are not worn.
• Harmful emissions of wood dust when the machine is used in
closed rooms. Always use supplementary dust extraction.
• Always remove the plug from the mains socket before
making any adjustments or maintenance, including changing
the bit.
• Contact with the bit.
• Reaching into the housing whilst the tool is running and
making contact with the bit.
• Kickback of workpiece and parts of workpiece.
• Bit fracture.
• Catapulting of faulty pieces from the bit.
• Do not use bits that are deformed or cracked.
• Always remove the plug from the mains socket before
making any adjustments or maintenance, including changing
the bit and setting the depth of cut.
Contents of carton
The router is supplied with the following accessories as
standard:
• 2 Collets 1/4” (6.35mm), 1/2” (12.75mm)
• Parallel guide with dust extraction adaptor
• Dust extraction adaptor
• Template guide
• Wrench
• Dust cover
Unpacking
Due to modern mass production techniques, it is unlikely that
your GMC Power Tool is faulty or that a part is missing. If you
find anything wrong, do not operate the tool until the parts have
been replaced or the fault has been rectified. Failure to do so
could result in serious personal injury.
Assembly
The GMC Electric Router is packed, fully assembled except for
the dust extraction adaptor and parallel and template guide.