Filter
Top Products
7
Unpacking
Due to modern mass production
techniques, it is unlikely that your GMC
Power Tool is faulty or that a part is
missing. If you find anything wrong, do
not operate the tool until the parts have
been replaced or the fault has been
rectified. Failure to do so could result in
serious personal injury.
Carefully remove all parts from the
carton and check the contents against
the following list:
1. Table top
2. Router plate
3. Left table leg
4. Right table leg
5. Rear fence
6. Adjustable fence bracket
7. Infeed/outfeed fence panels (2)
8. On/off switch box
9. Guard
10. Mitre gauge
11. Mitre gauge lock knob
12. Mitre gauge bar
13. 32mm table insert
14. 47mm table insert
15. 55mm table insert
16. Guard pin
17. Starting pin
18. Carriage bolts
(1 large, 1 medium, 5 small)
(1 small carriage bolt already
fitted to adjustable fence bracket)
19. Flat washers for carriage bolts (7)
(1 flat washer already fitted to
adjustable fence bracket)
20. Lock knobs (3 large, 4 small)
(1 large knob already fitted to
adjustable fence bracket)
21. Philips head screws (8)
22. Spring washers (8)
23. Flat washers (8)
24. Nuts (8)
25. Philips head screws for
attaching switch box (2)
26. Router plate screws (4)
1
2
3
4
5
6
7
7
8
9
16
101112
13
14
15
18
19
20
24
23
22
21
25 17
26