Filter
Top Products
Repair
3A2308C 39
Gear Replacement
Removal
1. Remove pump module from drive module. See
Pump Module/Drive Module, page 31.
2. If unit has accessible retaining bolt shown below,
proceed to step 3. If unit does not have accessible
retaining bolt, proceed to step 4.
3. Unscrew retaining bolt until gear (48) is no longer
retained. Remove gear from drive. Proceed to
Installation.
4. Remove four screws holding clamshells together
and two bolts connecting drive to clamshell.
5. Pull the clamshell up and unscrew retaining bolt
until gear (48) is no longer retained. Remove gear
from drive. Proceed to Installation.
Installation
1. Engage trigger lock and remove battery from unit.
ti19625a
ti19858a
ti19860a
ti19859a
48
ti19861a
ti19877a
ti19860a
ti19878a
48
ti19617a
ti19350a