Filter
Top Products
Repair
36 309295N
ES ON/OFF Valve Repair
1. Prepare the gun for service, page 25.
2. Loosen the screw (48). Remove the valve.
3. Lubricate the o-rings (22a* and 22b*) with non-sili-
cone grease, Part No. 111265. Do not over-lubri-
cate.
4. Clean and inspect parts for damage. Replace if nec-
essary.
NOTE: The protrusion on the retainer plate (22d) must
point upward.
5. Reinstall the valve. Torque the screw (48) to 15-25
in-lb (1.7-2.8 N•m).
Fig. 21. ES ON/OFF Valve
CAUTION
Do not over-lubricate parts. Excessive lubricant on
the o-rings can be pushed into the gun air passage
and blemish the finish on the workpiece.
TI1488A
22a*
22b*
22c
22d
22e
22f
22g
48