Graco 311001G Paint Sprayer User Manual


 
Daily Gun Care, Flushing, and Cleaning
311001G 13
Daily Gun Care, Flushing, and Cleaning
SKIN INJECTION HAZARD
Follow the Pressure Relief Procedure on page 10
before cleaning the gun.
CAUTION
Methlyene chloride with formic or propionic acid is not
recommended as a flushing or cleaning solvent with
this gun as it will damage aluminum and nylon compo-
nents.
CAUTION
Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method which
may allow solvent into the gun air passages.
Do not point the gun up while cleaning it.
Do not immerse the gun in solvent.
Do not wipe the gun with a cloth soaked in solvent;
wring out the excess.
Do not use metal tools to clean the air cap holes as this
may scratch them; scratches can distort the spray pat-
tern.
TI6563A
TI6564A
TI4827A
TI6565A