Filter
Top Products
Parts
311320H 29
Standard Mixing Chambers
Six standard mixing chambers are available. The following table provides a general description
about use and operational performance of each chamber. Actual pattern sizes and outputs
achieved may vary depending on material viscosity, hose length, condition of equipment, environ-
ment, working pressure, and additional factors.
46 Size
296594 (N-800)
296584 (L-800)
296590 (L-800-LM)
Designed for operation in confined areas and for spraying 3/8 to 1/2-in. (.7 to
1.3 cm) thicknesses. Gun may be held within 4 in. (10.2 cm) of target without
blowing away freshly applied foam. Pattern diameter is approximately 4 in.,
with gun 4-in. (10.2-cm) distance from target. Output is approximately 2 to
3-1/4 pounds/min. (.9 to 1.5 kg/min.).
46 Size
296595 (N-810)
296585 (L-810)
296591 (L-810-LM)
For the same uses as above. These chambers have an increased output of
approximately 3 to 4-1/2 pounds/min. (1.4 to 2.0 kg/min.).
55 Size
296597 (N)
296586 (L)
296592 (L-LM)
Designed for stud areas of trucks and small- to medium-sized wall applica-
tions. Pattern diameter is about 8 in. (20.3 cm), with gun 18 to 20 in. (45.7 to
50.8 cm) from target. Output is approximately 6 to 8 pounds/min. (2.7 to 3.6
kg/min.).
62 Size
296598 (N)
296587 (L)
For very large area applications. Pattern diameter is about 9 in. (22.9 cm)
with gun 18 to 20 in. (45.7 to 50.8 cm) from target. Output range is about 7
to 10 pounds/min. (3.2 to 4.5 kg/min.).
70 Size
296599 (N)
296588 (L)
For very large area applications. Pattern diameter is about 10 in. (25.4 cm)
with gun 18 to 20 in. (45.7 to 50.8 cm) from target. Output range is about 9
to 12 pounds/min. (4.1 to 5.4 kg/min.).
78 Size
296600 (N)
297592 (L)
For very large area applications. Pattern diameter is about 14 in. (35.6 cm)
with gun 24 in. (60.9 cm) from target. Output range is about 13-1/2 to 16-1/2
pounds/min. (6.1 to 7.5 kg/min.).