Filter
Top Products
Operation Basics
311320H 9
Air Hose Connection
To CONNECT air hoses, pull back sleeve of
female fitting, insert male fitting and slide
sleeve forward to secure connection.
To DISCONNECT air hoses, pull back sleeve
of female fitting and remove male fitting.
FIG. 5: Air Hose Connection
Valving Rod Adjustment
Screw
Use to regulate amount of valving rod travel
when gun trigger is depressed with air supply
connected. Turn clockwise to decrease travel,
and counterclockwise to increase travel.
1. Use 5/64 in. hex key wrench to loosen fric-
tion lock.
2. Turn adjustment screw as required and
tighten friction lock until screw no longer
easily turns by hand.
3. Check friction lock periodically and tighten
as required to prevent screw from slipping
during operation.
FIG. 6: Valving Rod Adjustment Screw
Pull Sleeve
Friction Lock