Shutdown and Cleaning
18 312001R
NOTE: Step 12 is for returning paint in hose back
to paint pail. One 50-ft hose holds approximately
1-quart (1-liter) of paint.
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Turn Prime/Spray valve to
SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trig-
ger until you see paint
diluted with flushing fluid
starting to come out of
gun.
13. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering
gun into waste pail until
flushing fluid dispensed
from gun is relatively
clear.
14. Stop triggering gun. Engage
the trigger lock.
15. Turn prime/spray valve to
Prime.
16. Turn power switch OFF.
17. Clean InstaClean Fluid Filter and gun, page 21.
18. Fill unit with Pump Armor
™
storage fluid. Read
Long Term Storage, page 22.
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
ti9345a
ti5580a
ti8909a
ti9745a
ti8908a
ti9346a
ti2018a