Storage
22 312001R
Storage
Short Term Storage
(up to 2 days)
1. Relieve pressure, page
10.
2. Leave suction tube and
prime tube in paint pail.
3. Cover paint pail and hoses
tightly with plastic wrap.
4.
a. Engage trigger lock.
b. Leave gun attached to
hose.
c. If you have not already
cleaned them, remove
tip and guard from gun
and clean with water or
flushing solvent. A soft
brush can be used to
loosen and remove
dried on material if
needed.
d. Wipe paint off outside of gun using a soft
cloth moistened with water or flushing sol-
vent.
Long Term Storage
(more than 2 days)
Always circulate Pump Armor storage fluid through
system after cleaning. Water left in sprayer will cor-
rode and damage pump. Follow Shutdown and
Cleaning, page 17, or Power Flush Cleaning, page
19.
1. Place suction tube in
Pump Armor storage
fluid bottle and prime
tube in waste pail.
2. Turn Prime/Spray valve
to PRIME.
3. Turn power switch ON.
4. Turn pressure control knob
clockwise until the pump
turns on.
5. When storage fluid comes
out of prime tube (5-10
seconds) turn power switch
OFF.
6. Turn Prime/Spray valve to
SPRAY to keep storage
fluid in sprayer during
storage.
ti9353b
ti9350a
ti9671a
ti8908a
ti2057a
ti9346a
ti5580a
ti9343b
ti9345a
ti2018a