Filter
Top Products
Switch Tip Installation
3A0156B 11
Switch Tip Installation
1. Use spray tip (A) to insert OneSeal
™
(B) into
guard (C).
2. Insert Switch Tip.
3. Screw assembly onto gun. Tighten.
Spray
1. Spray test pattern. Increase pressure to eliminate
heavy edges. Use smaller tip size if pressure adjust-
ment can not eliminate heavy edges.
2. Hold gun perpendicular, 10-12 in. (25-30 cm) from
surface. Spray back and forth. Overlap by 50%. Trig-
ger gun after moving and release before stopping.
Clearing Tip Clog
1. Release trigger, put safety ON. Rotate SwitchTip.
Take safety OFF. Trigger gun to clear clog. Never
point gun at your hand or into a rag!
2. Put safety ON. Return SwitchTip to original position.
Take safety OFF and continue spraying.
ti13023a
C
A
B
ti13024a
ti2710a
ti13030a
ti13025a
ti10166a
ti13033a
ti10167a
ti10166a
ti13034a
ti10167a