Filter
Top Products
Installation
3A0235G 11
Husky 515 and 716
1. Place riser tube (202) into drum. Tighten bung
adapter securely.
2. For carbon steel supply pump systems, Install
swivel fitting (102) in pump (201) fluid outlet.
3. Connect hose (103) between swivel fitting (102) and
GMS swivel fluid inlet fitting.
4. Install air supply kit and connect air lines, page 12,
to finish installation.
High-Flo
®
Pumps
1. Install elbow fitting (106) in pump (101) fluid outlet.
2. Connect hose (103) between elbow fitting (106) and
fitting (102). Install nipple (109) and swivel fitting
(110).
3. Connect swivel fitting (110) and GMS swivel fluid
inlet fitting.
For A-Side only: remove 1/2 npt swivel fitting from GMS
swivel fluid inlet prior to connecting swivel fitting (10).
4. Connect air lines (not supplied), page 12, to finish
installation.
F
IG. 4. Husky 716
201
102
103
r_246481_3a0235a_1a
202
F
IG. 5: High-Flo
101
106
102
103
110
109
111
r_257769_3a0235a_1a