Filter
Top Products
Maintenance
309295 17
Maintenance
Flush the Spray Gun
Flush the gun before changing colors, at the end of the
day, before storing, and before repairing the gun.
1. Turn the ES ON/OFF valve OFF.
2. Relieve the pressure.
3. Remove and clean the air cap and the spray tip.
Continued on page 18.
INSTRUCTIONS
Refer to the gun operation manual (supplied)
for Daily Care and Cleaning procedures.
WARNING
Fire, Explosion, and Electric Shock
Hazard
To reduce the risk of fire, explosion, or elec-
tric shock, turn the ES ON/OFF valve OFF
before flushing the gun.
CAUTION
Flush the gun with a non-conductive, compatible sol-
vent. Conductive solvents can cause the gun to mal-
function.
Do not use methylene chloride as a flushing or clean-
ing solvent with this gun as it will damage nylon
components.
WARNING
Fluid Injection Hazard
To reduce the risk of a fluid injection injury,
always follow the “Pressure Relief Proce-
dure”, page 25, whenever you are
instructed to relieve the pressure.
I O
ES
ti1337a
ti1341a
ti1334b