Filter
Top Products
Air Cylinder and Solenoid Valve
24 310645S
Reassembly
1. Insert crowned backing
nut on shaft of cylinder.
2. Using new cylinder from
kit, position cylinder in
sprayer frame, inserting
end of cylinder through
pump bracket mounting
hole.
3. Install locking nut flush to end of shaft.
4. Install dampening grommet.
5. Align hole in end of air cyl-
inder and replace pin.
6. Replace cotter pin
through hole in pin,
bending ends to
secure.
7. Reattach electric wire
terminals. Terminals are
not polarity sensitive
and can be connected to
either post.
8. Gently push hose in
quick release fitting.
9. Replace RotoFlex HD
Pump and hose
extension, page 12.
10. Replace front cover
and hopper. See
Removing and Replacing Hopper, Front and Back
Cover, page 9.
ti4421a
ti4410a
ti4455a
ti4456a
ti4417a
ti4407a