Filter
Top Products
Preparation
310645S 7
Preparation
Pressure Relief Procedure
1. Turn Main Power Switch
(A) OFF.
2. Turn fluid flow regulator
(K) all the way down to
reduce pressure.
3. Open gun air valve (aa).
4. Trigger gun, spray-
ing material back
into hopper (C).
Grounding and Electric
Requirements
The sprayer must be grounded. Grounding reduces the
risk of electrical shock by providing an escape wire for
the electrical current.
• The sprayer cord includes a
grounding wire with an appro-
priate grounding prong.
• The plug must be plugged
into an outlet that is properly
installed and grounded in
accordance with all local
codes and ordinances.
• Do not modify plug! If it will
not fit in outlet, have
grounded outlet installed by a
qualified electrician.
• Sprayer model electric
requirements are provided on
page 3.
Extension Cords
• Only use an extension cord
with an undamaged 3-prong
plug.
• For up to 100 ft (30.48 m) cord,
use 3-wire, 12 AWG (2.5 mm
2
)
minimum.
ti4303a
K
ti4000a
A
ti4294a
Ground
ti4295a
ti4296a
ti4297a
Ground
ti4295a