Graco ti23055a Paint Sprayer User Manual


 
Startup
332919C 13
Startup
1. Place suction tube and drain tube in grounded metal
pail partially filled with flushing fluid. Attach ground
wire to pail and to earth ground.
2. Turn prime valve down to DRAIN position. Turn
pressure control counterclockwise to lowest pres-
sure.
3. Set pump switch OFF.
4. Start Engine
a. Move fuel valve to open.
b. Move choke to closed.
c. Set throttle to fast.
d. Set engine switch to ON.
5. Pull rope to start engine.
6. Increase pressure enough to start pump stroking
and allow fluid to circulate for 15 seconds; turn pres-
sure down and turn prime valve forward to SPRAY
position.
7. Disengage spray gun trigger lock.
ti14844a
ti22708a
ti14842a
ti5790a
ti5248a
ti5249a
ti5250a
ti5262a
ti5263a
ti22709a
ti14845a
ti22818a