Graco ti23055a Paint Sprayer User Manual


 
Digital Tracking System (ProContractor and Ironman units)
332919C 17
Digital Tracking System
(ProContractor and Ironman units)
Operation Main Menu
Short press to move to next display. Press and hold (5
seconds) to change units or reset data.
1. Turn pressure to lowest setting. Trigger gun to
relieve pressure. Turn prime valve down to DRAIN
position.
2. Turn power ON. Pressure display appears. Dashes
will not appear unless pressure is less than 200 psi
(14 bar, 1,4 MPa).
Change Display Units
Press and hold DTS button for 5 seconds to change
pressure units (psi, bar, MPa) to desired units. Selec-
tion of bar or MPa changes gallons to liters x 10. To
change display units DTS must be in pressure display
mode and pressure must be at zero.
Job Gallons
1. Short press DTS button to move to Job Gallons (or
liters x 10).
NOTE: JOB scrolls past, then the number of gallons
sprayed above 1000 psi (70 bar, 7 MPa) displays.
Lifetime Gallons
1. Short press DTS button to move to Lifetime Gallons
(or liters x 10).
NOTE: LIFE scrolls briefly, then the number of gal-
lons sprayed above 1000 psi (70 bar, 7 MPa) dis-
plays.
ti22713a
ti13243a
ti22714a
ti22715a
OFF
ON
ti22716a
FT
M
ti22717a
ti22718a