Filter
Top Products
4 308–367
Assembling
the Sprayer
Cart Mounted Pump
Assemble
the suction hose (6) to the elbow (5) at the
pump intake. Screw the suction tube (7) onto the other
end of the hose. See Fig. 1.
Fig. 1
03356
7
6
5
Wall Mount Pump
1. Screw
the gauges (25) into the air regulators (F
,
G). See Fig. 2.
2.
Connect the nipple (34) and bleed valve (30) to the
swivel (36).
3.
Install the air manifold assembly (S) to the wall
bracket (7) using the two screws (29).
4.
Screw the elbow (22) into the pump air inlet, so the
female threads face down. Apply sealant to both
ends of the hose (23). Connect one end to the
elbow (22), then connect the other end to the
swivel (24) at the pump air regulator (F).
5.
Unscrew the filter bowl (T) from the top cap (U).
Apply sealant to the threads of the nipple (14) and
install the nipple and top cap in the pump outlet.
Lubricate the threads of the filter bowl (T) and
screw it into the top cap (U) tightly
.
6.
Mount the wall bracket 5 ft (1.5 m) above the floor
.
Be sure the wall is strong enough to support the
weight of the pump and accessories, fluid, hoses,
and stress caused during pump operation. Refer to
manual 306–783 for further information.
7.
Screw the suction kit swivel (13) onto the pump
intake.
Fig. 2
03357
1
25G
F
34
30
36
S
7
29
22
23
24
14
13
25
Apply
thread sealant.
1
1
1
T
U
Pail Mounted Pump
The
pail mounted pump is shipped completely as
-
sembled.