18
307–760
ACCESSORIES
Must be purchased separately
.
CAUTION
To avoid premature wear of the pressure switch,
never
use more than 7.6 m (25 ft) of 6 mm (1/4 in.)
ID outlet hose. When longer outlet hose is needed
use 9 mm (3/8 in.) ID hose at a maximum of 30 m
(100
ft) long. Never use 6 mm (1/4 in.) ID and 9 mm
(3/8
in.) ID hose together
.
Do
not use lacquer or lacquer thinner
in the suction
and outlet
hoses supplied with this system. These
fluids
quickly destroy the hose material. Use the op
-
tional
chemical–resistant hoses.
CHEMICAL–RESISTANT SUCTlON & OUTLET
HOSES
For
use with lacquer and lacquer thinners.
205–142 Outlet
Hose; Nylon; 9 mm (3/8”) ID; cpld
3/8 npsm(fbe); 7.6 m (25’);
21 bar (300psi) MAXIMUM WORKING
PRESSURE
219–095 Suction
Hose; Nylon
LARGER DIAMETER OUTLET HOSE
Use
this hose when using more than 7.6 m (25 ft) of outlet
hose. Not intended for use with lacquer or lacquer
thinners.
220–009
Outlet Hose; 9 mm (3/8”) ID; cpld 3/8
npsm(fbe);
15 m (50’); 1
7.5 bar (250
psi)
MAXIMUM
WORKING PRESSURE
NlPPLE
108–228
Needed to couple two lengths of hose 220–009.
3/8 npsm(mbe)
ADAPTER FITTING
220–265
5000 psi (350 bar) MAXIMUM WORKING PRESSURE
Couples
roller frame directly to roller valve.
3 INCH ROLLER FRAME & DlFFUSER 220–234
Same as 9 in. version but shorter
. (See page 16)
Must order cover separately
.
3 INCH ROLLER COVER
108–402 1/2 in. (12 mm) nap, for semi–rough to
smooth
surfaces.
9 INCH ROLLER COVERS
107–590 12 mm (1/2 in.) nap, for semi–rough to
smooth
surfaces
107–591
19
mm (3/4 in.) nap, for semi–rough sur
-
faces
107–592
32
mm (1–1/4 in.) nap,
for rough surfaces
ADJUSTABLE
EXTENSION TUBES
218–775
0.45–0.9 m (18–36 in.)
218–776
0.9–1.8 m (3–6 ft)
218–777
1.8–3.7 m (6–12 ft)
218–778
2.4–4.8 m (8–16 ft)
SPRA
Y W
AND
220–236
4050 psi (260 bar) MAXIMUM WORKING PRESSURE
Creates
soft spray when used with the PT2000.
TWO ACCESSOR
Y ADAPTER
220–232
1000 psi (70 bar) MAXIMUM WORKING PRESSURE
Adapts pump outlet of PT2000 to use two accessory
applicators
simultaneously
.
FLUSH ADAPTER
220–231
Allows you to use the city water supply to quickly flush
the
PT2000.