Filter
Top Products
4 308-332
FIRE AND EXPLOSION HAZARD
Improper
grounding, poor ventilation, open flames, or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury
.
D
Ground the equipment and the object being sprayed. Refer to
Grounding
on page 5.
D
If there is any static sparking or you feel an electric shock while using this equipment,
stop
spraying immediately
. Do not use the equipment until you identify and correct the problem.
D
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
D
Keep the spray area free of debris, including solvent, rags, and gasoline.
D
Electrically disconnect all equipment in the spray area.
D
Extinguish all open flames or pilot lights in the spray area.
D
Do not smoke in the spray area.
D
Do not turn on or of
f any light switch in the spray area while operating or if fumes are present.
D
Do not operate a gasoline engine in the spray area.
WARNING
WARNING
MOVING
P
ARTS HAZARD
Moving
parts, such as the air motor piston, can pinch or amputate your fingers.
D
Keep clear of all moving parts when starting or operating the pump.
D
Before servicing the equipment, follow the
Pressure Relief Procedure
on page 8 to prevent
the equipment from starting unexpectedly
.