Filter
Top Products
Gun Repair
312900C 29
Remove Fluid Packing
1. Prepare the gun for repair, page 27.
2. Remove the air cap and fluid nozzle, page 28.
3. Remove the fluid needle, page 28.
4. Loosen the trigger screws (8) and trigger (30). See
F
IG. 14.
5. Remove the packing rod (26), using the multi-tool
(37).
6. Check all parts for wear or damage and replace if
necessary.
Fig. 14. Remove Fluid Packing
NOTICE
Clean all parts in non-conductive solvent compati-
ble with the fluid being used, such as xylol or min-
eral spirits. Use of conductive solvents can cause
the gun to malfunction.
TI1549A
37
30
8