Filter
Top Products
16 309273
Daily:
Inspect, clean and replace as needed
D Manifold filter, gun filter and inlet stainer
D Wet cup for leakage, tighten if needed
D TSL level
D Gun trigger safety
D Tip wear, replace if necessary
D Electric cord and plug
Weekly:
D Check tightness of wet cup.
D Inspect all high pressure paint hoses.
Annually:
D Schedule maintenance check at an
authorized Graco repair center
Storage
Tip Wear
12
(305)
11
(280)
9
(229)
5.5
(140)
TIP OPENING ENLARGEMENT
New Tip
.015
Worn to
.017
Worn to
.019
Worn to
.021
FLOW RATE
in gpm (lpm)
1/4
(.87)
1/3
(1.14)
3/8
(1.4)
1/2
(1.74)
Note: A 515 tip produces a 10 in. pattern width when measured 12 in. from tip to work
surface; spraying paint with viscosity of 20 sec #4 Zahn cup and at 1600 psi
(110 bar, 11 MPa)
NEW
WORN
OUT
SPRAY PATTERN WIDTH
in inches (millimeters)
Worn Tips Waste Paint
Cost Money!
Maintenance
1. Perform Cleanup, page 11
2. Wrap power cord and
spray hose around sprayer
Graco Phone Number
TO PLACE AN ORDER, contact your Graco distributor, or call 1–800–690–2894 Toll Free to identify a distributor near you.
Sales Offices: Minneapolis, Detroit
International Offices: Belgium, Korea, Hong Kong, Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
www.graco.com
PRINTED IN U.S.A. 309273 12/2000 Revised 3/2003