Filter
Top Products
7309273
FLUSH
Note: Inspect fittings for leaks. Do not stop leaks with your hand or a rag! If leaks
occur, do Pressure Relief. Tighten leaky fittings. Repeat Startup, 1. – 5. If no
leaks, continue to trigger gun until system is thoroughly flushed. Proceed to 6.
Startup
15 SEC
1. Turn prime valve down.
Turn pressure control to lowest pressure.
2. Turn power ON.
3. Increase pressure enough to start motor
and allow fluid to circulate for 15 sec-
onds; turn pressure down, turn prime
valve horizontal.
4. Take spray gun trigger safety OFF.
5. Hold gun against grounded metal
flushing pail. Trigger gun and increase
fluid pressure slowly until pump runs
smoothly.
safety OFF ContractorContractor II