Filter
Top Products
Read and understand all instruction manuals before operating equipment.
For
Professional Use Only. Observe
All
Warnings.
EQUIPMENT MISUSE
HaZARD
General Safety
Any misuse of the spray equipment or accessories,
such as improper usage, over pressurizing, modifying
parts, using incompatible chemicals and fluids, or
using worn or damaged parts, can
cause
them to rup-
ture and result in serious injury, fire, explosion or
property damage.
Never point the spray gun at anyone or at any part
of the body.
System Pressure
This gun has a
Marimum
Met
Fluid
Pressure of
100
psi (7 bar) and a
Maximum
lnlet Air Pressure of
50
psi
(3.5 bar).
The
accessory remote pressure pots have a
Maximum
hlet Air Pressure of
50
psi (3.5 bar). Never
exceed the maximum pressures of
the
gun, pressure
pot, or any other component or accessory used in the
system.
Never put hand or fingers over the spray nozzle. Pressure Relief
0
Never try to stop or deflect leaks with Your hand or The spray gun cups and accessory remote pressure
body. pots remain pressurized until pressure is manually
Always turn
off
the air supply to the gun before
relieved. To reduce the risk of serious injury from
pressurized fluid or accidental spray from the gun,
always relieve pressure in the cup or pressure pot
removing the spray gun cup.
0
Check all spray equipment regularly and repair or
before checking or servicing any part of the spray
system; before installing, cleaning or changing fluid
nozzles: before loosening or removing the accessory
replace worn or damaged parts immediately.
Only use genuine Graco replacement parts when remote pressure pot cover; and whenever you stop
servicing the gun. spraying.
Never alter
or
modify any part of this equipment:
doing
so
could cause it
to
malfunction.
Spray
Gun
Cup
Read and follow the fluid and solvent manufactur-
er’s literature regarding the use of protective
eyewear, gloves, clothing, respirator and other
equipment.
To
relieve pressure:
1. Turn
off
the air supply to the gun.
2.
Unlatch the cup cover and loosen or remove the
cup from the cover.
Fluid Compatibility
Be sure all fluids and solvents used are chemicallv
compatible with the “Welted Parts” shown in the
Technical Data on the back cover. Always read the
fluid and solvent manufacturer’s literature before
using the fluid or solvent in this gun.
Do
not use l,l,l-trichloroethane, methylene chloride,
other halogenated hydrocarbon solvents or fluids con-
taining such solvents in the turbine spray system,
which contains aluminum and/or galvanized-coated
parts. Such use could result in a serious chemical
reaction, with the possibility of explosion, which could
cause death, serious injury, andlor substantial prop-
erty
damage.
Accessory
Remote
Pressure
Pot
To
relieve pressure:
1.
Turn
off
the air supply to the pressure pot.
2.
2
1/2
Gallon Remote Pot:
Pull
the pressure relief
valve ring
(206c)
until pressure
is
completely
2
Quart Remote Pot: Turn
out
the pressure relief
relieved.
knob (113) about one turn. Wait until pressure
is
completely relieved before removing the cover.
Close the knob before using the system again.
See Fig.
4
on page
7.
2
308-336