Filter
Top Products
22 GC-1412D
Shut-Down Instructions
Due to the different O-Ring materials and lubricants
used in the Guns never submerge or soak any
dispense gun in any type of solvent!
Submerging or soaking any Gun will immediately void
the Gun warranty.
1. $FWLYDWHWULJJHUORFNWRVWRSWKHWULJJHUIURPEHLQJ
activated. Refer to gun manuals if needed.
Formula Gun
Indy Gun
2. Push down the yellow slide valve, P/N 21402-00 on the
inlet air to bleed off air on system.
3. Turn catalyst yellow ball valve, P/N 21228-00 to Open
/ Recirculation position to dump psi. and close the valve.
4. Pressure should be maintained on the resin hose.
If you are using the Indy gun install the night plug
p/n 23527-00.
Refer to gun manuals for service and maintenance.
Push in and rotate
WULJJHUORFNSQ
23774-00 to stop
the trigger from being
activated.
5RWDWHWULJJHUORFN
to stop the trigger
from being activated.
Notice
Shut-down